Mecmesin's premium range computer-controlled tensile tester system
The MultiTest 5-i provides a powerful and comprehensive tensile testing system for force measurements up to 5kN. With full programming capability and a large selection of analysis options, through the power of Emperor™ software, the MultiTest 5-i offers unparalleled tensile test versatility.
The system is combined with Mecmesin's high performance loadcells (ILC), ensuring excellent resolution and outstanding accuracy.
If you require test automation we have a solution for you. Designed to eliminate operator error, improve test consistency and reduce costs in time and labour, our force test systems are combined with programmable logic controllers (PLCs) and customised material handling equipment to create automated test systems tailored to suit your specific test application.
|
Key Features
|
- Full control over tensile test program and analysis
- User-friendly graphical interface
- Calculations performed at the 'touch of a button'
- Auto-loadcell recognition/configuration
- Run to load, displacement, time or break detection
- IP splashproof membrane control panel
|
Technical Specifications
|
- Compression tester and tension testing
- Maximum load of 5000N (1100lbf)
- Crosshead movement up to 590mm (23.2") *
- Maximum sample diameter 190mm (7.5")
- 14 different loadcell capacities from 2N to 5000N (0.45 - 1100lbf)
- Load resolution of 1:6500 or better
- Loadcell accuracy of
±0.1% of full scale from 2 to 2500N
±0.2% of full scale for 5000N
- Speed range of 1 - 500mm/min (0.04 - 20"/min)
- Weight 38kg (84lb)
* measured without loadcell or grips (See technical datasheet for loadcell measurements)
|
|
|
1.jpg)
2.jpg)
3.jpg)
4.jpg)
